Menu
They are made of specially formulated compounds which are tough and have along life. Oil States Oil Saver Rubbers are molded from a special compound of oil, gas and abrasion-resistant rubber for long service life. Oil and other fluids are removed from the wireline and allowed to re-enter the well, which helps prevent potential well-site contamination. Our savers are supplied in different colours viz red, green, blue etc. They are made of hardness ranging from 35° to 55° A.
| ||||||||||
| ||||||||||
Tubing Stripper Rubbers are made from a proven oil and abrasion-resistant rubber. Tubing can be pulled on run-in with pressure still on the well while also stripping fluids off the tubing O.D. to provide a cleaner job site.
Type JU & Type JUS | |
Normal | Replacement Rubber for OEM Units |
| 2.375 | Guiberson Type JU & JUS |
| 2.875 | Guiberson Type JU & JUS |
| 3.500 | Guiberson Type JU & JUS |
They aid in keeping hydrocarbon seepage to a minimum while under pressure. They clean rods of excessive oil and waxes to provide a safer working environment. Size: 5.15″ O.D. 0.609″ LD.
| ||||||||||||||||||
| ||||||||||||||||||
| ||||||||||||||||||
BJ Type Diverter Valve Packers are made in different sizes i.e. 40″ Dia x 6″ Ht. and 40″ Dia x 14″ Ht. Rubber Packers are with steel rings moulded at the bottom of each side. These are used in Diverter Valve Packers with a pressure rating of 150 psi. They are made of Nitrile Rubber of 70+/-5° A hardness.
Split/Solid Type Packers are made of approx. 26″ Dia x 14″ Ht. They are used in Riser Tensioner Systems mostly used of Floaters. They come in Split as well as Solid Type. Their pressure rating is 150 psi. They are made of Nitrile Rubber of 70+ / -5° A Hardness bonded with steel rings and 2 ‘O’ Rings for proper sealing.
Bell nipples are tubeless seals size 40″ x ¾” having a pressure rating of 150 psi. These are used on the Bell Nipple Housing to hold the pipes in their place. Once pressurized, they grip the housing pipes in its place. They are tested of 225 psi. They are made of Nitrile Rubber (Oil-Resistant) with Brass Nipple at one end.
Rubber Clamping Block are used for clamping of BOP Hydrualic Hoses of different sizes. They are used for clamping of 5 different of hoses starting from 53 mm to 70 mm. The clamps/blocks are made of rubber bonded with galvanized steel plates and an eyebook at one end of the block. They are made of specialy formulated Natural Rubber, which is Abrasion Resistant. We can make these clamping blocks according to your specifications.
Expansion joints are used for compensation of pipeline movements and vibrations. PTFE Expansion Joints are used in highly conentrated acidlines, as PTFE is chemically inert & flexible. They are designed to withstand 10kg/cm of pressure with moulded steel ring on the each corrugation / arch with steel flanges at both ends.
Arrow Union Seals are constructed of an inflatable oil-resistant (Nitrile) tube. They are used for mud suction return lines and low pressure fluid lines. When they are inflated through an automotive type air-valve, it seals the union. For effective sealing the fuel pressure should exceed the line pressure by 50 psi. Micky Arrow Union Seals make up fast and easily without close line up. This allow pipe expansion and proper alignmetn without breaking the Seal. The Seal can be broken by deflating the tube.
Diyak Ltd. specializes in supply of various Engineering Polymer components and Oil Field equipment. Through internal growth, associations and acquisitions, Diyak Ltd. now offers a broad spectrum of products and services that encompass various industries about us.